Rainbow Electronics GM862-QUAD-PY - Manual (Page 197)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 197 of 434
+CMGL - List Messages SELINT 0 / 1
- type of number
129 - number in national format
145 - number in international format (contains the "+")
- text length
- TP-User-Data
Each message delivery confirm is represented in the format:
+CMGL: ,,,,,,,
- message status
- first octet of the message PDU
- message reference number
- arrival time of the message to the SC
- message status as coded in the PDU
Note: OK result code is sent at the end of the listing.
Note: If parameter is omitted the command returns the list of sms with “REC
UNREAD” status.
AT+CMGL? Read command has the same effect as Execution command with parameter
omitted
AT+CMGL=? Test command returns a list of supported s
Note If Text Mode (+CMGF=1) the Test command output is not included in
parenthesis
AT+CMGL=?
+CMGL: "REC UNREAD","REC READ","STO UNSENT",
"STO SENT","ALL"
Note The improving command @CMGL has been defined
Reference GSM 07.05
+CMGL - List Messages
SELINT 2
Note: the behaviour of command +CMGL differs depending on whether or not the improved SMS
commands operation mode has been enabled (see #SMSMODE)
(#SMSMODE=0)
#
S
M
S
M
O
D
AT+CMGL
[=] Execution command reports the list of all the messages with status
value stored into message storage ( is the
message storage for read and delete SMs as last settings of
command +CPMS).
The parameter type and the command output depend on the last
settings of command +CMGF (message format to be used)