Rainbow Electronics GM862-QUAD-PY - Manual (Page 248)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 248 of 434
#TSVOL – Tone Classes Volume SELINT 2
,
[,] classes.
Parameters:
-sum of integers each representing a class of tones which the
command refers to
1 - GSM tones
2 - ringer tones
4 - alarm tones
8 - signaling tones
16 - DTMF tones
32 - SIM Toolkit tones
64 - user defined tones
128 - reserved
255 - all classes
- it indicates which volume e’re using for the classes of tones
represented by
0 - we’re using default volume
1 - we’re using the volume .
- volume to be applied to the set of classes of tones represented
by ; it is mandatory if is 1.
0..max - the value of max can be read issuing the Test command
AT#TSVOL=?
AT#TSVOL? Read command returns for each class of tones the last setting of
and, if is not 0, of too, in the format:
# TSVOL: 1,[,]
…
#TSVOL: 64,[,]
Note: no info is returned for class 128.
AT#TSVOL=? Test command returns the supported range of values of parameters
, and .
Example at#scfg=84,1,5
OK
at#scfg?
#TSVOL: 1,0
# TSVOL: 2,0
# TSVOL: 4,1,5
# TSVOL: 8,0
# TSVOL: 16,1,5
# TSVOL: 32,0