Rainbow Electronics GM862-QUAD-PY - Manual (Page 292)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 292 of 434
#HFMICG - Handsfree Microphone Gain SELINT 0 / 1
Note: issuing AT#HFMICG= returns the OK result code.
AT#HFMICG? Read command returns the current handsfree microphone input gain, in the
format:
#HFMICG:
AT#HFMICG=? Test command returns the supported range of values of parameter
.
#HFMICG - Handsfree Microphone Gain
SELINT 2
AT#HFMICG=
[] Set command sets the handsfree microphone input gain
Parameter:
: handsfree microphone input gain
0..7 - handsfree microphone gain (+6dB/step)
AT#HFMICG? Read command returns the current handsfree microphone input gain, in the
format:
#HFMICG:
AT#HFMICG=? Test command returns the supported range of values of parameter
.
3.5.7.1.57 Handset Microphone Gain - #HSMICG
#HSMICG - Handset Microphone Gain SELINT 0 / 1
AT#HSMICG[=
[]] Set command sets the handset microphone input gain
Parameter:
: handset microphone input gain
0..7 - handset microphone gain (+6dB/step)
Note: issuing AT#HSMICG is the same as issuing the Read
command.
Note: issuing AT#HSMICG= returns the OK result code.
AT#HSMICG? Read command returns the current handset microphone input gain, in the
format:
#HSMICG:
AT#HSMICG=? Test command returns the supported range of values of parameter .
#HSMICG - Handset Microphone Gain
SELINT 2
AT#HSMICG=
[] Set command sets the handset microphone input gain