Rainbow Electronics GM862-QUAD-PY - Manual (Page 386)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 386 of 434
#CSURVC - Network Survey (Numeric Format) SELINT 2
0 -
3..6 -
- network control order
0..2 -
- timer 3168
- timer 3192
- discontinuous reception max time (in seconds)
- packed control ack
- blocked sequenc countdown max value
- alpha parameter for power control
- type of channel which shall be used for downlink
measurements for power control
0 - BCCH
1 - PDCH
(For non BCCH-Carrier)
,
where:
- decimal number; it is the RF channel
- decimal number; it is the receiption level (in dBm)
The last information from #CSURVC depends on the last #CSURVF
setting:
#CSURVF=0 or #CSURVF=1
The output ends with the string:
Network survey ended
#CSURVF=2
the output ends with the string:
Network survey ended (Carrier: BCCh: )
where
> - number of scanned frequencies
> - number of found BCCh
Example AT#CSURVC
Network survey started…
48,24,-52,0.00,610,1,33281,3648,0,2,30 48,5,14 19 22 48
82
14,8