Rainbow Electronics GM862-QUAD-PY - Manual (Page 345)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 345 of 434
3.5.7.5.12 Socket Parameters Save - #SKTSAV
#SKTSAV - Socket Parameters Save SELINT 0 / 1
AT#SKTSAV Execution command stores the current socket parameters in the NVM of the
device.
The socket parameters to store are:
- User ID
- Password
- Packet Size
- Socket Inactivity Time-Out
- Data Sending Time-Out
- Socket Type (UDP/TCP)
- Remote Port
- Remote Address
- TCP Connection Time-Out
Example AT#SKTSAV
OK
socket parameters have been saved in NVM
Note If some parameters are not previously specified then a default value will be
stored.
#SKTSAV - Socket Parameters Save
SELINT 2
AT#SKTSAV Execution command stores the current socket parameters in the NVM of the
device.
The socket parameters to store are:
- User ID
- Password
- Packet Size
- Socket Inactivity Time-Out
- Data Sending Time-Out
- Socket Type (UDP/TCP)
- Remote Port
- Remote Address
- TCP Connection Time-Out
Note: this command is not allowed for sockets associated to a GSM context
(see #SCFG).
AT#SKTSAV=? Test command returns the OK result code.
Example AT#SKTSAV
OK
socket parameters have been saved in NVM
Note If some parameters have not been previously specified then a default value
will be stored.