Rainbow Electronics GM862-QUAD-PY - Manual (Page 170)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 170 of 434
+CSMS - Select Message Service SELINT 2
AT+CSMS=
Set command selects messaging service . It returns the types of
messages supported by the ME:
Parameter:
0 - The syntax of SMS AT commands is compatible with GSM 07.05
Phase 2 version 4.7.0 (factory default)
Set command returns the types of messages supported by the ME:
+CSMS: ,,
where:
- mobile terminated messages support
0 - type not supported
1 - type supported
- mobile originated messages support
0 - type not supported
1 - type supported
- broadcast type messages support
0 - type not supported
1 - type supported
AT+CSMS? Read command reports current service setting along with supported
message types in the format:
+CSMS: ,,,
where:
- messaging service (see above)
- mobile terminated messages support (see above)
- mobile originated messages support (see above)
- broadcast type messages support (see above)
AT+CSMS=? Test command reports the supported value of the parameter .
Reference GSM 07.05; GSM 03.40; GSM 03.41
3.5.5.1.2 Preferred Message Storage - +CPMS
+CPMS - Preferred Message Storage SELINT 0 / 1
AT+CPMS[=
[,
[,]]] Set command selects memory storages , and
to be used for reading, writing, sending and storing SMs.
Parameters:
- memory from which messages are read and deleted
"SM" - SIM SMS memory storage
"ME" - ME internal storage (read only, no delete)
- memory to which writing and sending operations are made
"SM" - SIM SMS memory storage