Rainbow Electronics GM862-QUAD-PY - Manual (Page 390)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 390 of 434
3.5.7.7.5 BCCH Network Survey - #CSURVB
#CSURVB - BCCH Network Survey SELINT 0 / 1
AT#CSURVB= Execution command performs a quick network survey through M (maximum
number of available frequencies depending on last selected band) channels.
The survey stops as soon as BCCH carriers are found.
The result format is like command #CSURV.
Parameter:
- number of desired BCCH carriers
1..M
AT#CSURVB=? Test command reports the range of values for parameter in the format:
(1-M)
where M is the maximum number of available frequencies depending on last
selected band.
#CSURVB - BCCH Network Survey
SELINT 2
AT#CSURVB=
[] Execution command performs a quick network survey through M (maximum
number of available frequencies depending on last selected band) channels.
The survey stops as soon as BCCH carriers are found.
The result format is like command #CSURV.
Parameter:
- number of desired BCCH carriers
1..M
AT#CSURVB=? Test command reports the range of values for parameter in the format:
(1-M)
where M is the maximum number of available frequencies depending on last
selected band.
3.5.7.7.6 BCCH Network Survey (Numeric Format) - #CSURVBC
#CSURVBC - BCCH Network Survey (Numeric Format) SELINT 0 / 1
AT#CSURVBC=
Execution command performs a quick network survey through M (maximum
number of available frequencies depending on last selected band) channels.
The survey stops as soon as BCCH carriers are found.
The result is given in numeric format and is like command #CSURVC.
Parameter:
- number of desired BCCH carriers
1..M