Rainbow Electronics GM862-QUAD-PY User Manual

Page 127

AT Commands Reference Guide

80000ST10025a Rev. 5 - 09/07/08

page 127 of 434

+CPBR - Read Phonebook Entries

SELINT 2

currently selected phonebook memory storage (see +CPBS).

The response format is:
[+CPBR: ,,,[
+CPBR: ,,,[…]]]

where:
n> - the location number of the phonebook entry
- string type phone number of format
- type of phone number octet in integer format
129 - national numbering scheme
145 - international numbering scheme (contains the character "+")
- the alphanumeric text associated to the number; used character set

should be the one selected with command +CSCS.

Note: if “MC” is the currently selected phonebook memory storage, a
sequence of missed calls coming from the same number will be saved as
one missed call and +CPBR will show just one line of information.

Note: If all queried locations are empty (but available), no information text
lines will be returned, while if listing fails in an ME error, +CME ERROR:
is returned.

AT+CPBR=?

Test command returns the supported range of values for parameters
n> and the maximum lengths of and fields, in the
format:

+CPBR: ( - ),,

where:
- the minimum number, integer type
- the maximum number, integer type
- maximum field length, integer type
- maximum field length, integer type

Note: the value of could vary, depending on whether or not the
ENS functionality has been previously enabled (see #ENS), in the
following situations:

1. if “SM” memory storage has been selected (see +CPBS) and the

SIM supports the Extension1 service

2. if “FD” memory storage has been selected (see +CPBS) and the

SIM supports the Extension2 service

3. if “MB” memory storage has been selected (see +CPBS) and the

SIM supports the Extension6 service

Note

Remember to select the PB storage with +CPBS command before issuing
PB commands.

Reference GSM

07.07