Rainbow Electronics GM862-QUAD-PY - Manual (Page 378)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 378 of 434
#CSURV - Network Survey SELINT 0 / 1
AT#CSURV?
AT*CSURV? Read command has the same behaviour as Execution command with
parameters omitted.
Example AT#CSURV
Network survey started…
arfcn: 48 bsic: 24 rxLev: -52 ber: 0.00 mcc: 610 mnc: 1
lac: 33281 cellId: 3648 cellStatus: CELL_SUITABLE
numArfcn: 2 arfcn: 30 48 numChannels: 5 array: 14 19 22
48 82
arfcn: 14 rxLev: 8
Network survey ended
OK
Note The command is executed within max. 2 minutes.
#CSURV - Network Survey
SELINT 2
AT#CSURV[=
[,]]
AT*CSURV[=
[,]]
(both syntax are
possible; the second
syntax is maintained
only for backward
compatibility and will
not be present in
future versions) Execution command allows to perform a quick survey through channels
belonging to the band selected by last #BND command issue, starting from
channel to channel . Issuing AT#CSURV, a full band scan is
performed.
Parameters:
- starting channel
- ending channel
After issuing the command the device responds with the string:
Network survey started…
and, after a while, a list of informations, one for each received carrier, is
reported, each of them in the format:
(For BCCH-Carrier)
arfcn: bsic: rxLev: ber: mcc:
mnc: lac: cellId: cellStatus:
numArfcn: arfcn: [ ..[ ]]
[numChannels: array: [ ..[]] [pbcch:
[nom: rac: spgc: pat: nco:
t3168: t3192: drxmax: ctrlAck:
bsCVmax: alpha: pcMeasCh: ]]]