13 restricted sim access - +crsm – Rainbow Electronics GM862-QUAD-PY User Manual
Page 137
AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 137 of 434
+CALA - Alarm Management
SELINT 2
the week; the digits 1 to 7 corresponds to the days in the week
(Monday is 1).
“0” - it sets a recurrent alarm for all days in the week.
0 - the alarm will not be silent;
1 - the alarm will be silent.
During the "alarm mode" the device will not make any network scan and will
not register to any network and therefore is not able to dial or receive any
call or SMS, the only commands that can be issued to the MODULE in this
state are the #WAKE and #SHDN, every other command must not be
issued during this state.
Note: it is mandatory to set at least once the RTC (issuing +CCLK) before it
is possible to issue +CALA with
AT+CALA?
Read command returns the list of current active alarm settings in the ME, in
the format:
[+CALA:
AT+CALA=?
Test command returns the list of supported index values (currently just 0),
alarm types, maximum length of the text to be displayed, maximum length
of
+CALA: (list of supported
Example
AT+CALA="02/09/07,23:30:00+00"
OK
Reference
ETSI 07.07, ETSI 27.007
3.5.4.4.13 Restricted SIM Access - +CRSM
+CRSM - Restricted SIM Access
SELINT 0 / 1 / 2
AT+CRSM=
[,
[,
[,]]]
Execution command transmits to the ME the SIM
required parameters. ME handles internally all SIM-ME interface locking and
file selection routines. As response to the command, ME sends the actual
SIM information parameters and response data.
Parameters:
176 - READ BINARY
178 - READ RECORD
192 - GET RESPONSE
214 - UPDATE BINARY
220 - UPDATE RECORD
242 - STATUS