Rainbow Electronics GM862-QUAD-PY - Manual (Page 129)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 129 of 434
+CPBF - Find Phonebook Entries SELINT 2
- type of phone number octet in integer format
129 - national numbering scheme
145 - international numbering scheme (contains the character "+")
- the alphanumeric text associated to the number; used character set
should be the one selected with command +CSCS.
Note: +CPBF is not applicable if the current selected storage (see +CPBS)
is either “MC”, either “RC” or “LD”.
Note: if =”” the command returns all the phonebook records.
Note: if no PB records satisfy the search criteria then an ERROR message
is reported.
AT+CPBF=? Test command reports the maximum lengths of and
fields, in the format:
+CPBF: [],[]
where:
- maximum length of field , integer type
- maximum length of field , integer type
Note: the value of could vary, depending on whether or not the
ENS functionality has been previously enabled (see #ENS), in the
following situations:
1. if “SM” memory storage has been selected (see +CPBS) and the
SIM supports the Extension1 service
2. if “FD” memory storage has been selected (see +CPBS) and the
SIM supports the Extension2 service
1. if “MB” memory storage has been selected (see +CPBS)
and the SIM supports the Extension6 service
Note Remember to select the PB storage with +CPBS command before issuing
PB commands.
Reference GSM 07.07
3.5.4.4.10 Write Phonebook Entry - +CPBW
+CPBW - Write Phonebook Entry SELINT 0 / 1
AT+CPBW=
[]
[,
[,
[,]]] Execution command stores at the position a phonebook record
defined by , and parameters
Parameters:
- record position
- string type, phone number in the format
- the type of number
129 - national numbering scheme
145 - international numbering scheme (contains the character "+")