9 extended network survey - #csurvext – Rainbow Electronics GM862-QUAD-PY User Manual
Page 393
AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 393 of 434
#CSURVNLF -
SELINT 2
AT#CSURVNLF?
Read command reports whether automatic
enabled or not, in the format:
AT#CSURVNLF=?
Test command reports the range of values for parameter
3.5.7.7.9 Extended Network Survey - #CSURVEXT
#CSURVEXT - Extended Network Survey
SELINT 0 / 1
AT#CSURVEXT
[=
Set command enables/disables extended network survey.
Parameter:
1 - enables extended network survey; all the network survey execution
commands (#CSURV, #CSURVC, #CSURVU, #CSURVUC,
#CSURVB, #CSURVBC) display the BAList for every valid scanned
BCCh carrier
2 - enables extended network survey; all the network survey execution
commands (#CSURV, #CSURVC, #CSURVU, #CSURVUC,
#CSURVB, #CSURVBC) display the BAList for every valid scanned
BCCh carrier and, if GPRS is supported in the cell, they report some
GPRS informations carried by the System Information 13 of the BCCh
Note: if parameter is omitted the behaviour of Set command is the same as
Read command.
AT#CSURVEXT?
Read command reports whether extended network survey is currently
enabled or not, in the format:
AT#CSURVEXT=?
Test command reports the range of values for parameter
#CSURVEXT - Extended Network Survey
SELINT 2
AT#CSURVEXT
[=
Set command enables/disables extended network survey.
Parameter:
1 - enables extended network survey; all the network survey execution
commands (#CSURV, #CSURVC, #CSURVU, #CSURVUC,
#CSURVB, #CSURVBC) display the BAList for every valid scanned
BCCh carrier
2 - enables extended network survey; all the network survey execution
commands (#CSURV, #CSURVC, #CSURVU, #CSURVUC,
#CSURVB, #CSURVBC) display the BAList for every valid scanned
BCCh carrier and, if GPRS is supported in the cell, they report some