4 read message - +cmgr – Rainbow Electronics GM862-QUAD-PY User Manual

Page 205

AT Commands Reference Guide

80000ST10025a Rev. 5 - 09/07/08

page 205 of 434

@CMGL - List Messages Improved

SELINT 1

where
- message position in the storage
- message status
- originator/destination address, string type, represented in the

currently selected character set (see +CSCS)

- type of number
129 - number in national format
145 - number in international format (contains the "+")
- text length
- TP-User-Data

Each message delivery confirm is represented in the format:

@CMGL: ,,,,,,,

,

where
- message position in the storage
- message status
- first octet of the message PDU
- message reference number
- arrival time of the message to the SC

- sending time of the message
- message status as coded in the PDU

Note: The command differs from the +CMGL because at the end of the
listing a is put before the OK result code.

Note: If parameter is omitted the command returns the list of sms with “REC
UNREAD” status.

AT@CMGL?

Read command has the same effect as Execution command with parameter
omitted

AT@CMGL=?

Test command returns a list of supported s

Note If

Text

Mode

(+CMGF=1) the Test command output is not included in

parenthesis

AT@CMGL=?
@CMGL: "REC UNREAD","REC READ","STO UNSENT",
"STO SENT","ALL"

Reference GSM

07.05

3.5.5.3.4 Read Message - +CMGR

+CMGR - Read Message

SELINT 0 / 1

AT+CMGR=

Execution command reports the message with location value from
message storage ( is the message storage for read and