Rainbow Electronics GM862-QUAD-PY - Manual (Page 330)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 330 of 434
#FTPTYPE - FTP Type SELINT 2
#FTPTYPE:
#FTPTYPE=? Test command returns the range of available values for parameter :
#FTPTYPE: (0,1)
3.5.7.4.7 FTP Read Message - #FTPMSG
#FTPMSG - FTP Read Message SELINT 0 / 1
AT#FTPMSG Execution command returns the last response from the server.
AT#FTPMSG? Read command behaviour is the same as Execution command.
#FTPMSG - FTP Read Message
SELINT 2
AT#FTPMSG Execution command returns the last response from the server.
AT#FTPMSG=? Test command returns the OK result code.
3.5.7.4.8 FTP Delete - #FTPDELE
#FTPDELE - FTP Delete SELINT 0 / 1
AT#FTPDELE=
Execution command, issued during an FTP connection, deletes a file from
the remote working directory.
Parameter:
- string type, it’s the name of the file to delete.
Note: The command causes an ERROR result code to be returned if no
FTP connection has been opened yet.
#FTPDELE - FTP Delete
SELINT 2
AT#FTPDELE=
[] Execution command, issued during an FTP connection, deletes a file from
the remote working directory.
Parameter:
- string type, it’s the name of the file to delete.
Note: The command causes an ERROR result code to be returned if no
FTP connection has been opened yet.
AT#FTPDELE=? Test command returns the OK result code.
3.5.7.4.9 FTP Print Working Directory - #FTPPWD
#FTPPWD - FTP Print Working Directory SELINT 0 / 1
AT#FTPPWD Execution command, issued during an FTP connection, shows the current
working directory on FTP server.