Rainbow Electronics GM862-QUAD-PY - Manual (Page 232)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 232 of 434
+CMGD - Delete Message SELINT 2
1 - delete all read messages from storage, leaving unread
messages and stored mobile originated messages (whether sent
or not) untouched
2 - delete all read messages from storage and sent mobile
originated messages, leaving unread messages and unsent mobile
originated messages untouched
3 - delete all read messages from storage, sent and unsent
mobile originated messages, leaving unread messages untouched
4 - delete all messages from storage.
Note: if is present and not set to 0 then is ignored
and ME shall follow the rules for shown above.
AT+CMGD=? Test command shows the valid memory locations and optionally the
supported values of .
+CMGD: (supported s list)[,(supported s list)]
Example AT+CMGD=?
+CMGD: (1,2,3,6,7,17,18,19,20,37,38,39,47),(0-4)
OK
=
1
#
S
M
S
M
O
D
E
=
1
Reference GSM 07.05