Rainbow Electronics GM862-QUAD-PY - Manual (Page 125)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 125 of 434
+CPBS - Select Phonebook Memory Storage SELINT 0 / 1
the same number the read command will return only the last call
AT+CPBS=? Test command returns the supported range of values for the parameters
.
Note: the presentation format of the Test command output is the set of
available values for , each of them enclosed in parenthesis:
+CPBS: ("SM"),("FD"),("LD"),("MC"),("RC")
Reference GSM 07.07
+CPBS - Select Phonebook Memory Storage
SELINT 2
AT+CPBS=
Set command selects phonebook memory storage , which will be
used by other phonebook commands.
Parameter:
"SM" - SIM phonebook
"FD" - SIM fixed dialling-phonebook (only phase 2/2+ SIM)
"LD" - SIM last-dialling-phonebook (+CPBF is not applicable for this
storage)
"MC" - device missed (unanswered received) calls list (+CPBF is not
applicable for this storage)
"RC" - ME received calls list (+CPBF is not applicable for this storage).
“MB” - mailbox numbers stored on SIM; it is possible to select this storage
only if the mailbox service is provided by the SIM (see #MBN).
AT+CPBS? Read command returns the actual values of the parameter , the
number of occupied records and the maximum index number
, in the format:
+CPBS: ,,
Note: For =”MC”: if there are more than one missed calls from
the same number the read command will return only the last call
AT+CPBS=? Test command returns the supported range of values for the parameters
.
Reference GSM 07.07
3.5.4.4.8 Read Phonebook Entries - +CPBR
+CPBR - Read Phonebook Entries SELINT 0 / 1
AT+CPBR=
[,] Execution command returns phonebook entries in location number range
.. from the current phonebook memory storage selected
with +CPBS. If is omitted, only location is returned.
Parameters:
- integer type value in the range of location numbers of