Rainbow Electronics GM862-QUAD-PY - Manual (Page 128)

AT Commands Reference Guide
80000ST10025a Rev. 5 - 09/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 128 of 434
3.5.4.4.9 Find Phonebook Entries - +CPBF
+CPBF - Find Phonebook Entries SELINT 0 / 1
AT+CPBF=
Execution command returns phonebook entries (from the current
phonebook memory storage selected with +CPBS) which alphanumeric field
start with string .
Parameter:
- string type, it is NOT case sensitive; used character set should
be the one selected with command +CSCS.
The command returns a report in the form:
+CPBF: ,,,[[…]
+CPBF: n>,,,]
where n>, , , and have the same meaning
as in the command +CPBR report.
Note: +CPBF is not applicable if the current selected storage (see +CPBS)
is either “MC”, either “RC” or “LD”.
Note: if no PB records satisfy the search criteria then an ERROR message
is reported.
AT+CPBF=? Test command reports the maximum lengths of and
fields.
+CPBF: [],[]
Note Remember to select the PB storage with +CPBS command before issuing
PB commands.
Reference GSM 07.07
+CPBF - Find Phonebook Entries
SELINT 2
AT+CPBF=
Execution command returns phonebook entries (from the current
phonebook memory storage selected with +CPBS) which alphanumeric field
start with string .
Parameter:
- string type; used character set should be the one selected with
command +CSCS.
The command returns a report in the form:
[+CPBF: ,,,[
+CPBF: ,,,[…]]]
where:
n> - the location number of the phonebook entry
- string type phone number of format