Yaskawa MP940 Reference Manual - Manual (Page 285)

MotionSuite™ MP940 Machine Controller Reference Manual SGDH User Parameters
6-85
Pn503
Speed Coincidence
Signal Output Width rpm
1 ~ 1000 Sets the output conditions range for the
speed coincidence signal V-CMP.
The V-CMP signal is output when the
difference between the speed refer-
ence and the actual motor speed is at
or below this setting.
V-CMP is on between 1900~2100rpm
when the setting = 100, and the speed
reference is 2000rpm.
V-CMP(IBC0018) = 1: Speeds coincide.
V-CMP(IBC0018) = 0: Speeds do not
coincide.
10 Speed
Pn504
NEAR Signal Width Command
Unit
1 ~ 250 Cannot be used in connection with an
MP940. 7 Position
Pn505
Overflow Level 256 Com-
mand
Units
1 ~ 32767 Cannot be used in connection with an
MP940. 1024 Position
Sequence Related Parameters (Continued)
User
Parameter
Number
Digit
Position
Name
(setting
range)
Content
Default
Setting Control
Mode
Motor
Speed
Pn503
Reference
Speed
V-CMP is output in this
range