Yaskawa MP940 Reference Manual - Manual (Page 207)

MotionSuite™ MP940 Machine Controller Reference Manual Parameter Setting
6-7
Monitor Display
Click the Monitor tab. The settings cannot be changed; they are read only.
• See Details of Fixed Parameters for the setting content of the individual servo parameters for
motion monitoring.
Parameter Deletion
Click File > Delete in the Parameters menu.
Click the Yes button in the message box.
The fixed parameters and setup parameters for all axes are deleted upon
executing the delete operation.
Monitor Tab
Item Name Content
Axis Number The axis number shown in the combo box. Setting for Axis1.
No. Monitor Parameter Number
Name Name of Monitor parameter
Reg.-Number This is the register number corresponding the monitor parameter.
Monitor Data The current parameter values are displayed in the online mode.
Nothing is displayed in the offline mode.
Unit Setting data unit