Yaskawa MP940 Reference Manual - Manual (Page 205)

MotionSuite™ MP940 Machine Controller Reference Manual Parameter Setting
6-5
Set the default values as follows:
1. Select Edit (E) > Default Setting (R) in the Parameters menu.
2. Click the Yes (Y) button in the message box.
3. The default values are set for the fixed parameters.
These default settings apply to the fixed parameters of the currently
displayed servo axis.
Set-up Parameter Setting
Click the Set-up Parameters tab.
• See Details of Fixed Motion Parameters for the setting content of the individual motion set-up
parameters.
• The input setting values are immediately saved into the machine controller register upon pressing
the Enter key.The current value is then displayed.
Set-up Parameters Tab
Item Name Content
Axis Number The axis number shown in the combo box. Setting for Axis1.
No. Set-up Parameter Number
Name Name of parameter to be set.
Reg.-No. The register number corresponding to the parameter name is displayed.
Input Data Input (select) the parameter value. See the Motion Set-up Parameters list.
Unit Setting data unit
Current Value The current parameter values are displayed in the online mode.
Nothing is displayed in the offline mode.