Dell PowerEdge VRTX - Manual (Page 780)

Detailed
Description The server Lifcycle Controller responded with a failure for a WSMAN request.
Recommended
Response Action Verify correct operation of Lifecycle Controller on target server
Category Audit
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC8610
Message Job ID: arg1 . CMC sent all properties of profile arg2 to Server (Service Tag: arg3 ) in Slot arg4 .
Arguments
• arg1 = job ID
• arg2 = profile_name
• arg3 = service tag
• arg4 = slot number
Detailed
Description The all settings profile was sent to the Lifecycle Controller on the target server
Recommended
Response Action No response action is required
Category Audit
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
780