Dell PowerEdge VRTX - Manual (Page 516)

Detailed
Description Unable to set redundancy policy because PSU enumeration is in progress. The policy can be
set after PSU enumeration is complete.
Recommended
Response Action Retry the operation after the PSU enumeration is complete.
Category Audit
SubCategory PSU = Power Supply
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PSU8517
Message PSU redundancy policy changed.
Detailed
Description The operation to change the PSU redundancy policy is complete.
Recommended
Response Action No response action is required.
Category Audit
SubCategory PSU = Power Supply
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PSU8518
Message Unable to access the PSU arg1 FRU data.
Arguments
• arg1 = slot number
516