Dell PowerEdge VRTX - Manual (Page 803)

Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8533
Message Unable to update the LKVM firmware, because the target is not ready. ErrorCode=0x arg1 .
Arguments
• arg1 = error no
Detailed
Description The LKVM firmware update operation is not successful, because the target is not ready.
Recommended
Response Action Wait for the target to become ready. This may take a few minutes. After the target is ready,
then retry the operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8534
Message Unable to update the iKVM firmware.
Detailed
Description The iKVM firmware update operation is not successful.
Recommended
Response Action Reacquire the Image file from the source location, and then retry the operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
803