Dell PowerEdge VRTX - Manual (Page 813)

Detailed
Description Local CMC firmware update process is initiated.
Recommended
Response Action No response action is required.
Category Updates
SubCategory SWU = Software Change
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWU8555
Message Active CMC and Standby CMC firmware updates have been initiated.
Detailed
Description Active and Standby CMC firmware update process is initiated.
Recommended
Response Action No response action is required.
Category Updates
SubCategory SWU = Software Change
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWU8556
Message Switch config arg1 update on sled arg2 failed status arg3 .
Arguments
• arg1 = ID
• arg2 = SlotNumber
• arg3 = ErrorCode
813