Bat1007, Bat1008 – Dell PowerEdge VRTX User Manual
Page 75
Initial Default.
SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Alert
LC Log
LCD
Power Off Power
Cycle
Reset
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
BAT1007
Message
The battery on
arg1
learn cycle will start in
arg2
hours.
Arguments
•
arg1 =
Controller name
•
arg2 =
arg
Detailed
Description
This alert is provided for informational purposes.
Recommended
Response Action
No response action is required.
Category
Storage
SubCategory
BAT = Battery Event
Severity
Severity 3 (Informational)
Trap/EventID
4275
LCD Message
No LCD message display defined.
Initial Default.
SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Alert
LC Log
LCD
Power Off Power
Cycle
Reset
TRUE
FALSE
TRUE
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
BAT1008
Message
Write policy on
arg1
was changed to Write Through.
Arguments
•
arg1 =
controller name
Detailed
Description
The controller battery cannot maintain cached data for the required period of time. For
example, if the required period of time is 24 hours, then the battery cannot maintain cached
data for 24 hours.
Recommended
Response Action
Verify the battery health is good. See the storage hardware documentation to verify battery
health. Contact technical support.
Category
Storage
SubCategory
BAT = Battery Event
Severity
Severity 2 (Warning)
75