Dell PowerEdge VRTX - Manual (Page 418)

Detailed
Description Either the BIOS, BMC/iDRAC, LOM, or NIC firmware is out of date and does not support
FlexAddress.
Recommended
Response Action Update BIOS, BMC/iDRAC, LOM, and mezzanine card firmware. If problem persists please
contact customer support.
Category System Health
SubCategory PCI = PCI Device
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PCI3003
Message Virtual MAC address for component at bus arg1 device arg2 function arg3 was successfully
programed.
Arguments
• arg1 = bus
• arg2 = device
• arg3 = func
Detailed
Description None
Recommended
Response Action No response action is required.
Category System Health
SubCategory PCI = PCI Device
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
418