Dell PowerEdge VRTX - Manual (Page 778)

LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC8606
Message Quick Deploy Profile: Timeout exceeded while waiting for remote services ready on
Server
arg1 .
Arguments
• arg1 = server number
Detailed
Description The target server never reported that remote services were ready.
Recommended
Response Action Ensure that the server is operating properly on boot and Lifecycle Controller is enabled.
Category Audit
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC8607
Message Quick Deploy Profile: Start to apply profile " arg1 " to server arg2 .
Arguments
• arg1 = profile name
• arg2 = server number
Detailed
Description The Quick Deploy of Profile process has started.
Recommended
Response Action No response action is required
Category Audit
SubCategory SWC = Software Config
778