Dell PowerEdge VRTX - Manual (Page 167)

Detailed
Description The controller and attached enclosures are not cabled correctly.
Recommended
Response Action Refer to the storage hardware documentation for information on correct cabling
configurations.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 1 (Critical)
Trap/EventID 4329
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
CTL13
Message The arg1 cache has been discarded.
Arguments
• arg1 = Controller name
Detailed
Description The controller has flushed the cache and all data in the cache has been lost. This may occur
when the system has memory or battery problems that cause the controller to distrust the
cache. Although user data may have been lost, this alert does not always indicate that relevant
or user data has been lost.
Recommended
Response Action Verify that the battery and memory are functioning properly.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 2 (Warning)
Trap/EventID 4330
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
CTL14
Message Single-bit ECC error limit exceeded on the arg1 DIMM.
167