Dell PowerEdge VRTX - Manual (Page 742)

Recommended
Response Action Enable CSIOR and then run CSIOR. Invoke the GetRSStatus wsman method(Refer
LCManagement profile document for more details on this method). This method returns Status
and wait for Status to become "Ready"
Category Configuration
SubCategory STOR = Storage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
STOR059
Message Operation is not currently valid since there are no Virtual Disks on the controller.
Detailed
Description There are no Virtual Disk on the controller so the operation cannot be performed.
Recommended
Response Action Create a Virtual Disk before invoking this operation.
Category Configuration
SubCategory STOR = Storage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
STOR061
Message Initializing virtual disk is not supported on the RAID controller.
Detailed
Description Initializing virtual disk operation is not supported on the target device.
Recommended
Response Action For more information on supported operations, see Lifecycle Controller Remote Services Users
Guide.
Category Configuration
742