Dell PowerEdge VRTX - Manual (Page 261)

HWC4010
Message Hardware successfully updated for mezzanine card arg1 .
Arguments
• arg1 = number
Detailed
Description None
Recommended
Response Action No response action is required.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
HWC4011
Message Hardware unsuccessfully updated for mezzanine card arg1 .
Arguments
• arg1 = number
Detailed
Description None
Recommended
Response Action Check presence, re-install or reconnect, then re-attempt the update. If the problem persists,
contact support.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
261