Dell PowerEdge VRTX - Manual (Page 503)

Detailed
Description System BIOS failed to initialize the system management interrupt. This exception occurred
early in system power on, thus the system may not display video. (BIOS POST exception code
8C)
Recommended
Response Action Remove and reapply input power. If the problem persists, contact technical support. Refer to
the product documentation to choose a convenient contact method.
Category System Health
SubCategory PST = BIOS POST
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message SMI initialization failed. Power cycle system
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PST0141
Message QuickPath Interconnect (QPI) fatal error.
Detailed
Description Quick Path Interconnect failed during system POST. Reboot the system. If problem persists,
remove input power and reseat processors. This exception occurred early in system power on,
thus the system may not display video.
Recommended
Response Action Reboot the system. If problem persists, remove input power and reseat processors.
Category System Health
SubCategory PST = BIOS POST
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message QuickPath Interconnect (QPI) fatal error. Contact support
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PST0142
Message MRC fatal error.
Detailed
Description BIOS Memory testing failed. Compare system memory installation to supported system memory
configurations. Reduce system configuration to minimum memory configuration. This exception
occurred early in system power on, thus the system may not display video.
503