Dell PowerEdge VRTX - Manual (Page 783)

Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC4004
Message A firmware or software incompatibility detected between iDRAC in slot arg1 and CMC.
Arguments
• arg1 = number
Detailed
Description FlexAddress is not implemented in one of the versions of firmware. Please update the
firmware.
Recommended
Response Action Check firmware versions of iDRAC and CMC. Update to latest version.
Category System Health
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID 2338
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
SWC4005
Message A firmware or software incompatibility was corrected between iDRAC in slot arg1 and CMC.
Arguments
• arg1 = number
Detailed
Description None
Recommended
Response Action No response action is required.
Category System Health
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID 2339
783