Dell PowerEdge VRTX - Manual (Page 274)

Trap/EventID 2331
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
HWC5034
Message A link tuning failure detected on IO module arg1 .
Arguments
• arg1 = number
Detailed
Description Link tuning table not supported for this IO modular.
Recommended
Response Action Update the CMC firmware. If the problem persists, contact support.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 2 (Warning)
Trap/EventID 2330
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
HWC5036
Message A failure is detected on IO module arg1 .
Arguments
• arg1 = number
Detailed
Description The IOM module performance may be impact.
Recommended
Response Action Contact technical support. Refer to your product documentation to choose the contact method
that is convenient for you.
Category System Health
SubCategory HWC = Hardware Config
274