Hwc5003, Hwc5004 – Dell PowerEdge VRTX User Manual
Page 268

Detailed
Description
The fabric type for the IOM and mezzanine cards must match. Once an IOM or mezzanine card
is inserted into the chassis, the fabric type is then set for the CMC and the CMC will ensure that
all subsequent IOMs and mezzanine cards match.
Recommended
Response Action
Check chassis fabric type in CMC GUI and compare to the type of IOM or mezzanine card.
Category
System Health
SubCategory
HWC = Hardware Config
Severity
Severity 2 (Warning)
Trap/EventID
2330
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Alert
LC Log
LCD
Power Off Power
Cycle
Reset
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
FALSE
HWC5003
Message
arg1
is operating correctly.
Arguments
•
arg1 =
name
Detailed
Description
None
Recommended
Response Action
No response action is required.
Category
System Health
SubCategory
HWC = Hardware Config
Severity
Severity 3 (Informational)
Trap/EventID
2331
LCD Message
No LCD message display defined.
Initial Default.
LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Alert
LC Log
LCD
Power Off Power
Cycle
Reset
TRUE
FALSE
TRUE
TRUE
TRUE
FALSE
FALSE
FALSE
FALSE
HWC5004
Message
A link tuning failure detected on
arg1
.
268