Dell PowerEdge VRTX - Manual (Page 229)

13
FAN Event Messages
FAN8500
Message Enhanced Cooling Mode is Enabled
Detailed
Description Enabling Enhanced Cooling Mode will provide increased airflow capability to the blades by
increasing the maximum allowable blower speed at the cost of increased power consumption.
Recommended
Response Action No response action is required.
Category Audit
SubCategory FAN = Fan Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
FAN8501
Message Enhanced Cooling Mode is Disabled
Detailed
Description Disabling Enhanced Cooling Mode allows for reduced power consumption by reducing the
maximum speed of the blowers while still providing sufficient blade airflow.
Recommended
Response Action No response action is required.
Category Audit
SubCategory FAN = Fan Event
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
229