Dell PowerEdge VRTX - Manual (Page 689)

38
SEL Event Messages
SEL0002
Message Logging is disabled.
Detailed
Description This message appears when event logging of a specific type is disabled by the user. (IPMI
sensor type code 10h - offset 01h)
Recommended
Response Action If unintended, re-enable logging.
Category System Health
SubCategory SEL = Sys Event Log
Severity Severity 1 (Critical)
Trap/EventID 2377
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
SEL0003
Message Logging is enabled.
Detailed
Description None
Recommended
Response Action No response action is required.
Category System Health
SubCategory SEL = Sys Event Log
Severity Severity 3 (Informational)
Trap/EventID 2379
LCD Message No LCD message display defined.
Initial Default. LC Log
689