Dell PowerEdge VRTX - Manual (Page 722)

STOR012
Message Provided Physical disk not valid for this operation
Detailed
Description One or more of provided physical disks cannot be used.
Recommended
Response Action Check the RAID profile for correct status and use of provided physical disk(s)
Category Configuration
SubCategory STOR = Storage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
STOR013
Message One or more Storage device(s) are not in a state where the operation can be completed.
Detailed
Description One or more storage device(s) are in a state that prevents the command from completing.
Recommended
Response Action Run command again
Category Configuration
SubCategory STOR = Storage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
STOR015
Message Maximum virtual disks allowed for this controller has been reached
722