Dell PowerEdge VRTX - Manual (Page 728)

STOR026
Message Configuration Job not Created, there are no pending Configuration changes
Detailed
Description There are no pending configuration changes for this device, the job cant be created.
Recommended
Response Action There were no pending configuration changes found; the configuration job cannot be created
when there are pending configuration changes.
Category Configuration
SubCategory STOR = Storage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
STOR027
Message Virtual Disk name is not supported
Detailed
Description Setting the Virtual disk name is not a valid operation on this controller
Recommended
Response Action This operation should not be attempted on this controller
Category Configuration
SubCategory STOR = Storage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
STOR028
Message Virtual Disk not found
728