Dell PowerEdge VRTX - Manual (Page 512)

LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PSU8507
Message Insufficient power available because PSU in the slot arg1 is not present..
Arguments
• arg1 = slot number
Detailed
Description The PSU identified in the message has been disengaged or removed. Insifficient power is
available.
Recommended
Response Action Insert a PSU in the slot identified in the message.
Category Audit
SubCategory PSU = Power Supply
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PSU8508
Message arg1 , PSU arg2 firmware update is in progress.
Arguments
• arg1 = error string
• arg2 = slot number
Detailed
Description Unable to set the Power configuration because the PSU firmware update is in progress.
Recommended
Response Action Retry the operation after the PSU firmware update is completed.
Category Audit
SubCategory PSU = Power Supply
512