Dell PowerEdge VRTX - Manual (Page 806)

Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8540
Message Unable to update the PSU firmware, because the transfer of Image file is not successful.
ErrorCode=0x
arg1 .
Arguments
• arg1 = error no
Detailed
Description The PSU firmware update operation was not successful, because the firmware Image file
could not be transferred.
Recommended
Response Action Make sure that the PSU firmware image file is available at the location specified in the
operation, and then retry the operation.
Category Updates
SubCategory SWU = Software Change
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWU8541
Message Unable to update the PSU firmware, because the Image file is not accessible.
ErrorCode=0x
arg1 .
Arguments
• arg1 = error no
806