Dell PowerEdge VRTX - Manual (Page 763)

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC8511
Message User arg1 was successfully addedl.
Arguments
• arg1 = user name
Detailed
Description The user name identified in the message was added successfully.
Recommended
Response Action No response action is required.
Category Audit
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC8512
Message Unable to add User arg1 : arg2 - arg3
Arguments
• arg1 = user ame
• arg2 = error code
• arg3 = error message
Detailed
Description Unable to add user name identified in the message. The reason for this issue is described with
the error code in the message.
Recommended
Response Action Correct the error described in the message and retry the operation after a few minutes.
Category Audit
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
763