Dell PowerEdge VRTX - Manual (Page 743)

SubCategory STOR = Storage
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
STOR060
Message Configuration not supported on RAID controller.
Detailed
Description The operation is not supported on the target device.
Recommended
Response Action For more information on supported operations, see Lifecycle Controller Remote Services Users
Guide.
Category Configuration
SubCategory STOR = Storage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
STOR062
Message One or more Physical Disks specified are full and cannot be used to create additional Virtual
Disks.
Detailed
Description One or more Physical Disks specified are full and cannot be used to create additional Virtual
Disks.
Recommended
Response Action Make sure all physical disks specified to create a virtual disk have the required amount of free
space.
Category Configuration
SubCategory STOR = Storage
Severity Severity 3 (Informational)
743