Dell PowerEdge VRTX - Manual (Page 67)

4
BAT Event Messages
BAT1000
Message Battery on arg1 is missing.
Arguments
• arg1 = controller name
Detailed
Description The controller cannot communicate with the battery. The battery is absent or improperly
connected. A battery with a weak or depleted charge may also cause this message.
Recommended
Response Action Verify that the device is present and then check the cables. See the storage hardware
documentation to verify cabling. In addition check the connection to the controller battery and
the battery health. A battery with a weak or depleted charge may cause this message.
Category Storage
SubCategory BAT = Battery Event
Severity Severity 2 (Warning)
Trap/EventID 4274
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#LCD;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE TRUE FALSE FALSE FALSE
BAT1011
Message Battery on arg1 is in warn only mode and requires reconditioning.
Arguments
• arg1 = Controller name
Detailed
Description This alert is provided for informational purposes.
Recommended
Response Action No response action is required.
Category Storage
SubCategory BAT = Battery Event
67