Dell PowerEdge VRTX - Manual (Page 779)

Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC8608
Message Request [ arg1 ] for Server in Slot arg2 failed. Returned Fault= arg3
Arguments
• arg1 = wsman_method
• arg2 = server number
• arg3 = message
Detailed
Description The server Lifecycle Controller responded with a fault from a WSMAN request.
Recommended
Response Action Verify correct version of Lifecycle Controller on target server
Category Audit
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC8609
Message Request [ arg1 ] for Server in Slot arg2 failed. Returned MessageID= arg3 Message = arg4
Arguments
• arg1 = wsman_method
• arg2 = server number
• arg3 = message_id
• arg4 = message
779