Dell PowerEdge VRTX - Manual (Page 816)

Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SYS004
Message Invalid parameter value for arg1 .
Arguments
• arg1 = parameter name
Detailed
Description The value provided for the specified parameter is invalid.
Recommended
Response Action Refer to the Lifecycle Controller Remote Services documentation and retry the operation with a
valid value for the identified parameter.
Category Configuration
SubCategory SYS = System Info
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SYS005
Message AttributeName array and AttributeValue array element count mismatch.
Detailed
Description The AttributeName input array and AttributeValue input array do not have the same number of
elements.
Recommended
Response Action Verify AttributeName and AttributeValue pairs match and are valid. Refer to the Lifecycle
Controller Remote Services documentation.
Category Configuration
SubCategory SYS = System Info
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
816