Dell PowerEdge VRTX - Manual (Page 761)

Detailed
Description A new Profile identified in the message has been created.
Recommended
Response Action No response action is required.
Category Audit
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC8508
Message Unable to capture Profile from server in slot arg1
Arguments
• arg1 = slot number
Detailed
Description Unable to communicate with iDRAC.
Recommended
Response Action Check if iDRAC is ready and system is running properly. Utilize the RACADM command by
running "racadm getversion" to list all the servers and make sure the iDRAC version is
displayed. If the iDRAC is listed as Not Ready then wait until it becomes ready. A Virtual Reseat
may be required.
Category Audit
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC8509
Message Unable to apply arg1 Profile to server in slot arg2
761