Dell PowerEdge VRTX - Manual (Page 114)

Recommended
Response Action Do the following: 1) Remove the server identified in the message. 2) Restart the CMC and wait
for the CMC to complete the start up process. 3) Reinsert the server identified in the message.
If the problem persists, contact your service provider.
Category System Health
SubCategory CMC = Chassis Management Controller
Severity Severity 1 (Critical)
Trap/EventID 2545
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#EMAIL Alert;#LC Log;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
CMC8519
Message The LOM riser FRU for slot arg1 FRU ID arg2 is not functioning.
Arguments
• arg1 = slot number
• arg2 = fru id
Detailed
Description FRU of the LOM riser specified in the message is not functioning or CMC is unable to read it.
Recommended
Response Action Do the following: 1) Reset iDRAC of the specified server or virtual reseat the server. 2) Reset
CMC and wait for a few minutes. If the issue persists, contact your service provider.
Category System Health
SubCategory CMC = Chassis Management Controller
Severity Severity 1 (Critical)
Trap/EventID 2545
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#EMAIL Alert;#LC Log;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
CMC8520
Message The FRU on server arg1 is not functioning.
Arguments
• arg1 = slot number
114