Dell PowerEdge VRTX - Manual (Page 782)

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC8613
Message Failed to Fully Extract arg1 Boot List Settings from Stored Profile
Arguments
• arg1 = boot_list_name
Detailed
Description The selected profile is corrupt. Recreate a new profile with the desired properties, or use a
different profile.
Recommended
Response Action Recreate or use a different profile
Category Audit
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC8614
Message Legacy Stored Profile Setting: arg1 Not Recognized. Please use Profile Generated from CMC4.3
or Later
Arguments
• arg1 = setting
Detailed
Description The selected profile is either corrupt or contains old settings. Recreate a new profile or use a
different profile.
Recommended
Response Action Recreate or use a different profile
Category Audit
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
782