Dell PowerEdge VRTX - Manual (Page 593)

PWR8591
Message Servers are turned off to allocate power to the newly inserted hard disk drives.
Detailed
Description Before inserting hard disk drives, always make sure the Chassis has enough available power.
Otherwise operating servers may be turned off.
Recommended
Response Action Make sure there is enough power supply to distribute power. Go to, the Chassis Overview >
Power > Power Budget Status. In the Total Input Power Available For Allocation field, view the
available power. To add more power, insert more PSUs or remove unused components from
the chassis.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 1 (Critical)
Trap/EventID 8417
LCD Message No LCD message display defined.
Initial Default. SNMP Alert;#EMAIL Alert;#LC Log;#Remote System Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
PWR8592
Message Chassis Management Controller is unable to turn on or turn off the chassis because another
chassis power operation is in progress.
Detailed
Description The request to turn on or turn off the chassis was issued before the previous power operation
was completed.
Recommended
Response Action Retry the operation after the current operation is complete.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
593