Dell PowerEdge VRTX - Manual (Page 549)

29
PWR Event Messages
PWR8500
Message Chassis power state updated to arg1 from arg2 .
Arguments
• arg1 = new power state
• arg2 = old power state
Detailed
Description The chassis power state from the configuration database and the current state are different.
The current chassis power state will be updated in the configuration database. This is to insure
the chassis power state will be the same if the CMC is rebooted or a CMC failover occurs.
Recommended
Response Action No response action is required.
Category Audit
SubCategory PWR = Power Usage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
PWR8501
Message Sussessfully set Virtual Infrastructure Device power to arg1 WDC
Arguments
• arg1 = power reading
Detailed
Description Power allocation succeeded for Virtual infrastructure.
Recommended
Response Action No response action is required.
Category Audit
SubCategory PWR = Power Usage
549